Oakley - Airbrake Big Roll-Off Kit

Oakley - Airbrake Big Roll-Off Kit

The Oakley Airbrake Roll-Off has received a lot of criticism over the past few years. Fortunately, Oakley has released a new Roll-Off Kit that gives you maximum visibility without any problems! The Oakley Airbrake BIG Roll-Off Kit has significantly changed compared to the old version. All the improvements make the Oakley Airbrake even better than it already was. You have never had so much vision under any circumstances!
 

The improvements of the Oakley Airbrake BIG Roll-Off Kit

Canisters
Oakley has brought the Roll-Off system of getting stuck to a minimum by changing the canisters. It appeared that the Roll-Off kit often got stuck because the rolled-up film with mud had too little space. Oakley has easily solved this by making both the left and right canisters bigger and more robust to create more space.

Flange
To keep your roll-off so smooth, Oakley added a simple but clever flange to the roll-off pins. This keeps sand away from the motor part so it will never get stuck.

Cover
You probably still know them, the old covers that came loose with sweat and tears. Fortunately, this is past, because Oakley has improved the covers! Thanks to simple securing at the back, instead of the front, the covers are easy and quick to mount and disassemble. Also, by securing at the back the covers ensure better protection against coming loose, for example by a stone, etc.
 

How to mount an Oakley Airbrake BIG Roll-Off Kit

Step 1: Remove the outriggers.

Step 2: Install the anti-friction accessory around the tear-off pins. The small edges that are attached to it have to point upwards and to the glass. Make sure that you install it the right way so that the roll-off kit fits perfectly.

Step 3: Click the canisters on the glasses in the same way as you install the outriggers.

Step 4: Paste the beginning of the film to another pin and insert it into the cannisters.

Step 5: Wide open with perfect sight!